How others are using Norland Adhesives (看看别人怎样用我们的产品): Artwork, Electronics, Fiber optics, Holograms, Lasers, Liquid Crystal Displays (LCD), Microfabrication, MEMS, Optical lenese, Glass slide preparation, Waveguides.
Norland Optical Adhesives (制作透镜，棱镜，光纤等光学粘合剂)
Norland Electronic Adhesives (电子用胶合剂适用于军事，宇航 和电子产品等)
These one part adhesives will set in seconds with UV light or cure with heat to form an electrically insulating bond to fasten, , tack or fill. Areas not exposed to UV light can cure because of a latent heat catalyst.
Special Application Adhesives
Norland UV Sealant 91 ("UVS 91")is a screenable paste adhesive specifically designed to seal the perimeter of liquid crystal displays. It provides the ultimate solution for manufacturing displays because it is a single component, solventless, sealant that cures quickly at room temperature by exposure to UV light.
NBA 107 is a single component, UV curing adhesive used for temporary bonding of lenses to metal polishing mounts. The adhesive cures in minutes at room temperature by exposure to longwave UV light and eliminates the heat induced strain typical of the old fashioned hot pitch blocking methods. NBA 107 is specifically formulated to provide low shrinkage and low strain to further minimize any potential strain on the lens during the blocking process. Deblocking is readily accomplished by heating in hot water with a small amount of detergent or wetting agent added.
Norland Conductive Adhesive 130 is a single component, silver filled, conductive adhesive for preventing static buildup and will cure tack free to a tough, resilient polymer when exposed to ultraviolet light and heat. It is recommended as a fast and efficient way to tack, fill,seal or bond precision components or wires in place. With this system, a drop of adhesive is used to form a bridge between the component or wire,and the substrate. Exposure to UV light quickly tacks the component in place. Heat curing must be used to fully cure the adhesive. Useful applications for NCA 130 include wire tacking and bonding of head gimbal assemblies.
UV Light Sources (紫外线胶合照射灯)
The Norland collection of long-wave, ultraviolet light sources have been carefully selected to fit all of your bonding needs when using Norland Ultraviolet Curing Adhesive. Whether you are bonding lenses, tacking electronic components, or curing optical splices, these lights are designed to cure the adhesive quickly and safely. Special features and designs have been added to some of these lights so that they easily work together with the Norland UVC Optical Splice.